|
|
Space Heater |
These heaters are designed precisely to disperse almost 100% heat transfer efficiency to enable them to keep almost everything dry in standard conditions inside the control panel, which has various sensors and delicate contacts incorporated inside and needs to operate on continuous rating. Our Space Heater occupies small space and is very easy to install.
These are available in two different models such as Square Section and Round Section that is also called as economy model.
The square section has more safety as against the Round one as its lead wire are enclosed by a cover which protects entering of moisture directly into connections.
The photo shows typical Square Section Space Heater.
Salient Features Of Space Heater
Totally enclosed resistance wire in stainless Steel sheath,
Operating voltage 230 Volts A.C. with50 Hz,
High Voltage test at 2.5 K.V. to 3 K.V.,
Insulation test more than 10MegaOhms,
Double Insulation for Live Wire,
Properly Insulated Heating Coil.
|
|
|
|
|
Strip Heater |
Strip heaters without fins are designed for contact heating. They are used in a verity of applications including mounting to the outside of tanks/container surfaces for heating of liquids and solids. They are also used for direct heating of platens, dies and other flat metal shapes and solids.
It is extremely important that heaters are mounted on a flat, smooth and clean surface with good contact maintained between the heater and the mounting surface. Air gaps between the mating surfaces will result in a reduced heat transfer and possibly shorter heater life due to resulting higher heating temperatures.
[strip heater]
When surface mounting strip heaters allowance must be made for liner thermal expansion of heater. A common method of allowing liner thermal expansion is to firmly tighten the mounting bolt on one end and alllow the heater to expand within the confines of the mounting bolt on the other end of strip heater.
Care should be taken not to overtightining/torquing the screw and nut terminal posts as breakage of the internal heater connections may occur. Also connections of heater are usually made with high temperature wire.
As with any electrically heated product, the proper application of heater and temperature control is the most important factor in optimum performance, efficiency. No two systems are alike It is extremely important that attention has been given to the total product or system design as well as operating environment.
|
|
|
|
|
Quartz Infrared Heaters |
Quartz heaters consists of a helically wound resistance coil encased in a pure silica fused tube. Once the coil is encased in the tube, then the tube is been enclosed by means of specially designed ceramic insulated caps, which are securely fastened with high temperature cement providing excellent support to the power connecting terminals of the quartz tube.
Quartz Heaters are generally designed to be used in horizontal position only.
These quartz Heaters are available in various diameters like 8mm, 10mm, 12mm, 15mm, 19mm etc with variation in lengths from 300mm to1500mm.
Modules of quartz heaters are also available in which a resistance wire is enclosed in a small diameter quartz tube running parallel to each other and mounted in a special housing. The two sizes are designed to be installed in same dimensional spacing as ceramic infra red elements.
Quartz infra red half modules are available in different wattages from 125 Watts to 650 Watts. and full modules are available from 250 Watts to 1000Watts.
Care should be taken not to over torque the screw and nut terminal posts as breakage of the internal heater connections may occur. Also connections to the heater should be made with high temperature wire.
As with any electrically heated product, the proper application of heater and temperature control is the most important factor in optimum performance, efficiency and longevity i.e. longer life. No two systems are alike It is extremely important that attention has been given to the total product or system design as well as operating environment.
Typical Applications Of Quartz Heaters
Thermoforming,
Plastic Forming,
Shrink Packaging Tunnels,
Laminating,
Curing Rubber,
Drying Textiles,
Drying Lacquers and paints,
|
|
|
|
|
Mica And Ceramic Band Heater |
Mica/ Ceramic band heaters are generally used for preheating raw material during forming components in plastic/rubber mould industry.
These are available in various diameters and wattages with material of construction like Mild Steel, Stainless Steel, Brass or combination of these material.
These are also available with Mica/Asbestos or Glass wool insulation which minimize heat losses.
|
|
|
|
|
Procelain Heater |
Porcelain Heaters are available in various diameters and flexible lengths to suit customer's requirements in various wattages and voltages.
Some typical applications of these heaters are Medium size ovens, powder coating booths, chemical/paint industry etc.
|
|
|
|
|
Furnace Coils |
Description / Specification of Furnace Coils
We are involved in offering a wide range of Furnace Coils to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Furnace Coils. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Movable Furnace |
Description / Specification of Movable Furnace
We are involved in offering a wide range of Movable Furnace to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Movable Furnace. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Out Flow Energy Saving Heater |
Out Flow energy saving heater that fits at the exit of tank for heating furnace oil form ambient temperature to required temperature.
These are available in various diameters as well as lengths with different wattages with inbuilt "thermostat".
|
|
|
|
|
Energy Saving Jackets |
Energy saving jackets for moulding machines.
These are made out of mild steel, Stainless steel material and are available with or without “quick release” locks for reducing down time while replacing heaters inside.
|
|
|
|
|
De Humidifier |
De-Humidifier made out of mild steel construction for maintaining 35 to 40 degree centigrade temperature in a closed chamber for testing automobile battery plates.
Available in various wattage depending on chamber area.
|
|
|
|
|
Silicon Coated Heater |
Some typical applications of these heaters are in medical equipments, laboratory equipments, optical equipments, drum heaters, laminators, mild heated press, photo processing equipments, vaporizing water in dryer, etc.
Manufacturing includes precisely selected wire wounded as per customized shape and then with special vulcanizing process it forms desired shape with various options for lead connections exit.
Since it undergoes vulcanizing process it may be even used in direct liquid heating.
This is an excellent heater for heating plates, where heat transfer required by conduction in quick succession. Metals like brass, copper, aluminum are some metals where these heaters are convenient.
As with any electrically heated product, the proper application of heater and temperature control is the most important factor in optimum performance, efficiency. No two systems are alike It is extremely important that attention has been given to the total product or system design as well as operating environment.
Please let us know your application to enable us to select proper heater design.
|
|
|
|
|
Air Ducting Heater |
Description / Specification of Air Ducting Heater
We are involved in offering a wide range of Air Ducting Heater to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Air Ducting Heater. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Custom Made Heating System |
Description / Specification of Custom Made Heating System
We are involved in offering a wide range of Custom Made Heating System to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Custom Made Heating System. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Glass Heater |
Glass due to their excellent replant properties are extensively used in highly acidic as well as alkaline chemicals to heat up solutions in required time.
Mahendra thermo electricals have indigenously developed spirpotech glass heaters without center rod due to specially design it generates more surface area which results in delivering higher wattage in same length in comparison with regular ceramic bead design
Due to its design it allows us to us thicker wire gauge that enhances the life of heater.
These are available in three sizes i.e outer diameter 35mm 45mmand 50mm.
Available in “Borosilicate” for low temperatures and “Quartz” for high temperature
|
|
|
|
|
Glass U Bend Heater |
Description / Specification of Glass U Bend Heater
We are involved in offering a wide range of Glass U Bend Heater to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Glass U Bend Heater. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
Flexible Matt Heater |
Major advantage of "FLEXIBLE MATT" heater is their ability to form custom made shape for more lateral surface area coverage to produce uniform heat.
Design begins with precieciously selected wire gauge made into “Helically” wounded coil passed and stitched simultaneously to form custom made shape ensuring almost even distribution of heating in quick succession.
Insulation jackets can be provided to minimize atmospheric heat losses and to optimize heat generated.
|
|
|
|
|
Screw Plug Heaters |
Description / Specification of Screw Plug Heaters
We are involved in offering a wide range of Screw Plug Heaters to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Screw Plug Heaters. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
|
|
|
|